GENERATOR - PART NUMBER BRG 342/6
ROTARY CASE (out runner) GENERATOR
Electrical Specification Material Specification
Rated Output power (VA) 6000 Shaft Material High standard iron steel
Rated Rotation Speed (RPM) 100-120 Shaft Bearing High standard SKF or NSK
Rectified DC Current at Rated Output 28 A related to voltage Outer Frame Material High standard iron steel and aluminium
Required Torque at Rated Power 700 Nm Fasteners (nuts and bolts) High standard iron steel
Phase Resistance (Ohm) 0,5 related to voltage Windings Temperature Rating 180 degrees celsius
Output Wire Square Section (mm sq) 10 Magnet Material Nd FeB
Output Wire Length (mm) 1000….3000 Magnet Temperature Rating 150/degrees celcius
 Insulation F Lamination Stack High specification cold rolled steel
Generator Configuration 3 ph. star connected AC output
No Load Voltage <245> on demand
Efficiency 0,88
Number of Poles 32
Mechanical Specification
Weight (Kg) 230
Starting Torque (Nm) ≤ 2% rated torque
Bearing Type High standard NSK 6024 C3
Text Box: losses
Text Box: Shaft generator torque
VA 
6000 700 Nm
4800                      
3600                      
2400                      
1200                      
                     
10 20 30 40 50 60 70 80 90 100 rpm
Starting torque: Less than 2% of the nominal torque
We are available to change mechanical and electrical features to adapt generators to customers needs
150
Ø 11 553 30
20
     
   
   
Ø 328.5    
   
    Ø190 Ø 342
   
   
   
output power cable    
     
Tabulated values are typical and affected by an error of ± 10%
150
M10 x 30 fixing holes
Ø 342